P0720SB overview
P0720SB is a component documented by Teccor Electronics. The PDF description identifies it as "SIDACtor Device." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Teccor Electronics
- Part number: P0720SB
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- General Notes: All measurements are made at an ambient temperature of 25 °C.
- I PP applies to -40 °C through +85 °C temperature range.
- Off-state capacitance is measured at 1 MHz with a 2 V bias and is a typical value for “SA” and “SB” product. “SC” capacitance is approximately 2x the listed value.
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the P0720SB datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=p0720sb-teccor-electronics