OP27AZ/QMLR overview
OP27AZ/QMLR is a component documented by List of Unclassifed Man. The PDF description identifies it as "MICROCIRCUIT, LINEAR, RADIATION HARDENED, LOW NOISE, PRECISION OPERATIONAL AMPLIFIER, MONOLITHIC SILICON." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: List of Unclassifed Man...
- Part number: OP27AZ/QMLR
- Category: Amplifier
- Datasheet length: 14 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1/ Thermal resistance, junction-to-ambient ( JA): 1.4 Recommended operating conditions .
- Device type 02: Device type 03: / Stresses above the absolute maximum rating may cause pe rmanent damage to the device.
- 2/ For supply voltages less than 22 V, the absolute maximum input voltage is equal to the supply voltages.
- If differential input voltage exceeds 0.7 V, the input current should be limited to 25 mA.
- Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range.
- Test Symbol Conditions 1/ 2/ 3/ unless otherwise specified Group A subgroups Device type Limits 4/ Unit Min Max Large signal voltage gain AVO V OUT = 10 V, RL 2 k 1 01 1000 V/mV VOUT = 10 V, RL 600 800 VOUT = 10 V, RL 2 k 2,3.
- 2/ Unless otherwise specified, VS = 15 V and source resistance (RS) = 50 .
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the OP27AZ/QMLR datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=op27az-qmlr-list-of-unclassifed-man