OP166W overview
OP166W is a component documented by OPTEK Technologies. The PDF description identifies it as "GaAs Plastic Infrared Emitting Diode." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: OPTEK Technologies
- Part number: OP166W
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- cece e tee ee eee teen eersreeeeeees 260°C Notes: ; .
- Ulin sooner erating doe 8 For identification purposes, cathode lead is 0.080" (1.52 mm) nom shorter than anode lead.
- Crosby Road Carrollton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 2-20 Electrical Characteristics (Ta = 25° C unless otherwise noted) [SympoL| PARAMETER | MIN [TYP |MAX[UNITS| TEST CONDITIONS [Po [RaciantrowerOuput fos] || mw Ne=20ma |.
- So Eos 2 ,| is4ueet4,3 F./ [TT tt é Po) BC ees es Cr “Coit = EEE.
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the OP166W datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=op166w-optek-technologies