OP162DRU overview
OP162DRU is a component documented by Analog Devices. The PDF description identifies it as "15 MHz Rail-to-Rail Operational Amplifiers 10/02-Data Sheet changed from REV. C to REV. D." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Analog Devices
- Part number: OP162DRU
- Category: Amplifier
- Datasheet length: 16 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- With their incredibly low offset voltage of 45 mV (typ) and low noise, they are perfectly suited for precision filter applications and instrumentation.
- The low supply current of 500 mA (typ) is critical for portable or densely packed designs.
- These products operate from single supplies as low as +2.7 V to dual supplies of ± 6 V.
- The output drive of 30 mA (sink and source) is needed for many audio and display applications; more output current can be supplied for limited durations.
- Specifications subj]ect to change without notice. (@ VS = +5.0 V, VCM = 0 V, TA = +25/H11543C, unless otherwise noted) REV.
- D –3– (@ VS = +3.0 V, VCM = 0 V, TA = +25/H11543C, unless otherwise noted) OP162/OP262/OP462–SPECIFICATIONS Parameter Symbol Conditions Min Typ Max Units INPUT CHARACTERISTICS Offset Voltage V OS OP162G, OP262G, OP462G 25 325 mV –40∞C £ TA.
- 9 5 4.99 V IL = 5 mA 4.85 4.94 V Output Voltage Swing Low V OL IL = 250 mA, –40∞C £ TA £ +125∞C –4.99 –4.95 V IL = 5 mA –4.94 –4.85 V Short Circuit Current I SC Short to Ground ± 80 mA Maximum Output Current I OUT ± 30 mA POWER SUPPLY Powe.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- APPLICATIONS
- ELECTRICAL CHARACTERISTICS
- Revision History
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the OP162DRU datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=op162dru-analog-devices