NANO-8-MARINE overview
NANO-8-MARINE is a component documented by Danley Sound Labs. All. The PDF description identifies it as "Ultra Compact Loudspeaker Rev. 20240802." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Danley Sound Labs. All ...
- Part number: NANO-8-MARINE
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Its operational frequency range is defined from 136 Hz to 21 KHz , with a tolerance of -10dB.
- When subjected to an input of 2.83V, the loudspeaker’s sensitivity is 89 dB SPL at a standardi zed distance of 1 meter.
- ARCHITECT/ENGINEERS SPECS Frequency and Phase Response Impedance Horizontal Response Horizontal Directivity Contour Vertical Response Vertical Directivity Contour KLIPPEL 100 105 110 -700 -600 -500 -400 -300 -200 -100 10 20 50 100 200 500.
- Sound Pressure Level / dB (re 20 µPa) Frequency / Hz On-Axis 10° 20° 30° 40° 50° 60° Performance Specifications: All acoustic measurements are rounded to the nearest whole number.
- Operational Frequency Range: Denotes the frequency range where the loudspeaker’s response is 10 dB lower than the specified sensitivity.
- Sensitivity: The SPL at 1 meter, produced by a 2.83V sinusoidal sweep from 20 Hz to 20KHz, measured without additional processing.
Topics covered by the datasheet
The document includes sections related to:
- NANO DANLEY
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the NANO-8-MARINE datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=nano-8-marine-danley-sound-labs-all