MT7844S overview
MT7844S is a component documented by Maxic Technology Corpor. The PDF description identifies it as "Non-isolated APFC BUCK LED Driver." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Maxic Technology Corpor...
- Part number: MT7844S
- Category: Power Management
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The MT7844S integrates 550V MOSFET, which further simplifies external circuit. Single-stage active power factor correction (PFC > 0.90) Ultra-high voltage power supply without start-up resistor and power supply diode High accurate LE.
Topics covered by the datasheet
The document includes sections related to:
- DESCRIPTION
- FEATURES
- APPLICATIONS
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MT7844S datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mt7844s-maxic-technology-corpor