MT2068 overview
MT2068 is a component documented by Microtune,Inc. The PDF description identifies it as "SINGLE-CHIP BROADBAND TUNER." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Microtune,Inc
- Part number: MT2068
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- 48 MHz to 1.0 GHz input frequency range
- 3.3 V power supply
- Works seamlessly with digital demodulators
- Low-power sub-1 Watt dual- conversion architecture
- Integrated first IF filter
- Single-ended RF input reduces BOM by eliminating input balun
- Minimal external components
Applications listed in the PDF
- VoIP Telephony Modems
- Cable Modems
- Multi-tuner All-Digital Set-top Boxes (MPEG or IP Video)
- Digital Set-top Boxes without loop- through
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The MT2068 is capable of receiving frequencies in the 48 MHz to 1.0 GHz range and of converting a selected channel to a standard intermediate frequency (IF) between 30 MHz and 60 MHz.
- VoIP Telephony Modems Cable Modems Multi-tuner All-Digital Set-top Boxes (MPEG or IP Video) Digital Set-top Boxes without loop- through 48 MHz to 1.0 GHz input frequency range 3.3 V power supply Works seamlessly with digital demodulators L.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
- FEATURES
Engineering review checklist
- Verify supply range, input common-mode range and output swing at the required load.
- Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
- Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MT2068 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mt2068-microtune-inc