MT1393ETC overview
MT1393ETC is a component documented by Microtune,Inc. The PDF description identifies it as "RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Microtune,Inc
- Part number: MT1393ETC
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- Double down-conversion
- Selective pre-filter circuit
- Image reject mixers
- Keyed AGC selectable, AGC- threshold programmable
- Highly sophisticated IF filter technology with dynamically controlled bandwidth
- FM demodulator with noise cancellation
- Receiving condition analyzer with detectors for “adjacent channel”, “multipath” and “fieldstrength”
Applications listed in the PDF
- Car radios (FM audio reception or background data reception)
- Dynamic navigation systems (Traffic data reception)
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- This serial bus is used to control frequency settings and multiple programmable functions of the MT1393ETC.
- M I C R O T U N E MT1393ETC FM/RDS Tuner Module MT13 93 ETC FM R DS TUNER M ODUL E PRODUCT BRIEF OPERATING CHARACTERISTICS PARAMETER MIN TYP MAX UNIT 5V Power supply voltage Current 35 mA Voltage 4.5 5 5.5 V 8.5V Power supply voltage Curre.
- Stop signal output Voltage 0.2 5 V Maximum sink current 1 mA Multipath detector output Voltage 0.1 4.9 V Output resistance 2.5 kΩ MPX audio output Load resistance 20 kΩ Output resistance 50 Ω Interrupt output Low level voltage 1.2 V High l.
Topics covered by the datasheet
The document includes sections related to:
- APPLICATIONS
- FEATURES
- ELECTRICAL CHARACTERISTICS
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MT1393ETC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mt1393etc-microtune-inc