MSP3410B overview
MSP3410B is a component documented by Micronas. The PDF description identifies it as "Multistandard Sound Processor." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Micronas
- Part number: MSP3410B
- Category: IC
- Datasheet length: 68 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Recommended Operating Conditions 47 13.5.3.
- Features of the Analog Section – three selectable analog pairs of audio baseband in- puts (=three SCART inputs) Input level: ≤ 2 V RMS; input impedance: ≥25 kΩ – one selectable analog mono input (i.e.
- AM sound); Input level: ≤ 2 V RMS; input impedance: ≥10 kΩ – two high quality A/D converters; S/N-Ratio: ≥85 dB – 20 Hz to 20 kHz Bandwidth for SCART-to-SCART- Copy facilities – MAIN (loudspeaker) and AUX (headphones): two pairs of 4-fold.
- noise voltage in mute mode: ≤ 10 µV (BW: 20 Hz ...
- Quadrature Mixers The digital input coming from the integrated A/D conver- ter may contain audio information at a frequency range of theoretically 0 to 9 MHz corresponding to the selected standards.
- Two programmable increments, to be divided up into Low- and High Part, determine frequency of the oscillator, which corre- sponds to the frequency of the desired audio carrier.
- Lowpass Filter Block for Demodulated Signals The demodulated FM and AM signals are further low- pass filtered and decimated to a final sampling frequen- cy of 32 kHz.
Topics covered by the datasheet
The document includes sections related to:
- Datasheet sections
- applications
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MSP3410B datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=msp3410b-micronas