MSKW2025 overview
MSKW2025 is a component documented by Minmax Technology Co.,. The PDF description identifies it as "5W 2:1 Wide Input Range SMD, Single & Dual Output DC/DC Converters." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Minmax Technology Co., ...
- Part number: MSKW2025
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The series consists of 21 models with input voltage ranges of 9-18VDC, 18-36VDC and 36-75VDC which provide precisely regulated output voltages of 3.3V, 5V, 12V, 15V, {5V, {12V and {15VDC.
- The -40] to +71] operating temperature range makes it ideal for data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, process/machine cont.
- The modules have a maximum power rating of 5W and a typical full-load efficiency of 85%, continuous short circuit,Remote on/off EN55022 Class A conducted noise compliance minimize design-in time, cost and eliminate the need for external fi.
- Free-Air ConvectionCoolingmW2,500---Internal Power Dissipation %95---Humidity]260---Lead Temperature (1.5mm from case for 10 Sec.) ]+125-40Storage TemperatureVDC100-0.748VDC Input Models ]+90-40CaseOperating TemperatureVDC50-0.724VDC Input.
- EfficiencyReflected Ripple Current Input CurrentOutput CurrentOutput Voltage Input Voltage Model Number Model Selection Guide # For each output uF100100100680680680680Maximum Capacitive Load Unit{15V #{12V #{5V #15V12V5V3.3VModels by Vout.
- Ripple & Noise measurement bandwidth is 0-20 MHz.
- Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MSKW2025 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mskw2025-minmax-technology-co