MPX5100DP overview
MPX5100DP is a component documented by Freescale Semiconductor. The PDF description identifies it as "Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Freescale Semiconductor...
- Part number: MPX5100DP
- Category: Sensor
- Datasheet length: 12 Pages
Key features noted in the PDF
- 2.5% Maximum Error over 0° to 85°C Ideally suited for Microprocessor or Microcontroller-Based Systems Patented Silicon Shear Stress Strain Gauge Available in Absolute, Diffe.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Operating Characteristics (VS = 5.0 VDC, TA = 25°C unless otherwise noted, P1 > P2.
- and from the minimum or maximum operating temperature points, with zero differential pressure applied.
- or maximum rated pressure at 25°C. TcSpan: Output deviation over the temperatur e range of 0° to 85°C, relative to 25°C. TcOffset: Output deviation with mi nimum pressure applied over the temperatur e range of 0° to 85°C, relative to 2.
- ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT .S D 8 PL G SBM0.25 (0.010) A T -A- -B-N S CASE 482A-01 ISSUE A SMALL OUTLINE PACKAGE MILLIMETERSINCHES 0.100 BSC 2.54 BSC DIM A B C D G J K M N S V W MIN 0.415 0.415 0.500 0.026 0.009 0.100 0.444 0.5.
- CASE 482C-03 ISSUE B SMALL OUTLINE PACKAGE MPX5100 Sensors Freescale Semiconductor 7 F G N L R 123456 MAM0.136 (0.005) T POSITIVE PRESSURE (P1) C B M J S -A- STYLE 1: PIN 1.
- CASE 867F-03 ISSUE D UNIBODY PACKAGE MPX5100 Sensors Freescale Semiconductor 9 NOTES: CONTROLLING DIMENSION: INCH.
- Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd.
Topics covered by the datasheet
The document includes sections related to:
- Features
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MPX5100DP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mpx5100dp-freescale-semiconductor