MCR25 overview

MCR25 is a component documented by Rohm. The PDF description identifies it as "Low Ohmic Thick Film Chip Resistors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Rohm
  • Part number: MCR25
  • Category: IC
  • Datasheet length: 5 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • 0.5W (1 / 2W) E = P × R −55°C to +125°C at 70°C Item Conditions Specifications Rated power Rated voltage Operating temperature Nominal resistance See Table 1.
  • Power must be derated according to the power derating curve in Figure 1 when ambient temperature exceeds 70°C.
  • E: Rated voltage (V) P: Rated power (W) R: Nominal resistance (Ω) 100 -55 0 70 100 125 AMBIENT TEMPERATURE (˚C) POWER LOAD (%) Fig.1 Table 1 Resistance tolerance Special code L S L S Resistance range (Ω) Resistance temperature coefficient.
  • Rev.D 2/4 zCharacteristics Item Test conditions (JIS C 5201-1)Resistor type Guaranteed value Resistance Variation of resistance with temperature Solderability Damp heat, steady state Endurance at 70°C Endurance Rapid change of temperature.
  • JIS C 5201-1 4.5 JIS C 5201-1 4.8 Measurement : +25 / −55 / +25 / +125°C Load voltage : A Measuring method : measure upper termination by 4 proves.
  • MC 2 R Nominal resistance ±1% ±5% F J 0.1 to 9.1Ω (class F) 0.1 to 0.91Ω (class J) 0.047 to 0.091Ω L S JZH Embossed tape (4mm Pitch) φ180mm (7inch) 4,000MCR25 Packaging Specifications Code Reel (φ180mm) : Compatible with JEITA standard "EI.
  • Resistance toleranceCode Packaging specifications Reel Basic ordering unit(pcs)J(±5%) F( ±1%) FL,FS,JS JL 4 digits 3 digits Resistance code, 3 or 4 digits.

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the MCR25 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=mcr25-rohm

MCR25 Rohm IC MCR25 datasheet MCR25 specifications MCR25 applications