MCR22-6 overview
MCR22-6 is a component documented by ON Semiconductor. The PDF description identifies it as "Sensitive Gate Silicon Controlled Rectifiers November, 2008 ??Rev. 6." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: MCR22-6
- Category: Logic IC
- Datasheet length: 7 Pages
Key features noted in the PDF
- 150 A for 2 /C0109s Safe Area
- High dv/dt
- Very Low Forward “On” V oltage at High Current
- Low−Cost TO−226 (TO−92)
- Pb−Free Packages are Available* MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off−State Voltage (Note 1) (RGK = IK, TJ = /C004240 to.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Functional operation above the Recommended Operating Conditions is not implied.
- Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
- Device Positioning on Tape** Maximum alignment deviation between leads not to be greater than 0.2 mm.
- Defective components shall be clipped from the carrier tape such that the remaining protrusion (L) does not exceed a maximum of 11 mm.
- Maximum non−cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
- ORDERING INFORMATION
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MCR22-6 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mcr22-6-on-semiconductor