MACH220-12JC overview
MACH220-12JC is a component documented by Lattice Semiconductor. The PDF description identifies it as "High-Density EE CMOS Programmable Logic." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Lattice Semiconductor
- Part number: MACH220-12JC
- Category: Logic IC
- Datasheet length: 29 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The order number (Valid Combination) is formed by a combination of: OPERATING CONDITIONS C = Commercial (0 °C to +70°C) FAMILY TYPE MACH = Macro Array CMOS High-Speed SPEED -10 = 10 ns t PD -12 = 12 ns tPD -15 = 15 ns tPD -20 = 20 ns tPD M.
- The order number (Valid Combination) is formed by a combination of: OPERATING CONDITIONS I = Industrial (–40 °C to +85°C) FAMILY TYPE MACH = Macro Array CMOS High-Speed SPEED -14 = 14.5 ns t PD -18 = 18 ns tPD -24 = 24 ns tPD MACH220-14 MA.
- OPERATING RANGES Commercial (C) Devices Temperature (T A) Operating Supply Voltage (VCC ) with Operating ranges define those limits between which the func- tionality of the device is guaranteed.
- VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
- INDUSTRIAL OPERATING RANGES Ambient Temperature (TA) Supply Voltage (VCC) with Operating ranges define those limits between which the func- tionality of the device is guaranteed.
- These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modified where frequency may be affected.
- Maximum frequency shown uses internal feedback and a D-type register.
Topics covered by the datasheet
The document includes sections related to:
- ORDERING INFORMATION
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the MACH220-12JC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=mach220-12jc-lattice-semiconductor