M24308/24-56 overview
M24308/24-56 is a component documented by ITT Industries. The PDF description identifies it as "D Subminiature Connectors." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ITT Industries
- Part number: M24308/24-56
- Category: IC
- Datasheet length: 301 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Dimensions are shown in mm (inch) Dimensions subject to change Materials and Finishes Description Material Finish Shell Steel Tin Insulator Thermoplastic, UL 94V-0 None (color: dark green) Contact Socket: Copper Alloy Gold over Nickel.
- PC Board Thickness 3,20 - 1,60 (.125 - .062) Materials and Finishes Description Material Finish Shell Steel Tin Insulator Thermoplastic, UL 94V-0 None (color: black) Contact Copper Alloy Gold over Nickel (Standard) or Gold over PdNi (-408).
- Terminating end Tin (Socket only) Hardware Steel/Copper Alloy Tin/Zinc Specifications Temperature Rating −55°C to 125°C Current Rating 7.5 A Contact Resistance 55 millivolt max at 7.5 A test current Dielectric Withstanding Voltage 1000 VAC.
- Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature 90° PCB Selection Guide Specifications Temperature Rating −55°C to 125°C Current Rating 7.5 A Contact Resistance 55 millivolt max.
- at 7.5 A test current Dielectric Withstanding Voltage 1000 VAC at Sea Level Materials and Finishes Description Material Finish Shell Steel Tin Insulator Thermoplastic, UL 94V-0 None (Color: dark green) Pin Contact Copper Alloy Gold over Ni.
- BRACKET, PLASTIC 2,54 (.100) W F 9,40 (.370) 3,70 (.146) Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature ZD* 90° Solder Termination (Stamped) — European Footprint 10,2 mm Part Numbers Shell Size Layout Plastic.
- H J Rear Face E A C B D Ø 3,05 (.120) 10° 1 13 2514 F 1,33 (.052) G MAX 7,00 (.276) 14,50 (.571) L Dimensions are shown in mm (inch) Dimensions subject to change D Subminiature D*W Discrete Wire IDC Part Numbers Shell Size Layout Through H.
Topics covered by the datasheet
The document includes sections related to:
- Applications
- Description
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the M24308/24-56 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=m24308-24-56-itt-industries