M20SSD overview
M20SSD is a component documented by Silicom Ltd. The PDF description identifies it as "U.2 to 4 x M.2 NVMe SSD module." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Silicom Ltd.
- Part number: M20SSD
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 0.5 Host Interface Support PCI Express 3.0 (8Gb/s) and 2.1 (5Gb/s) PCI Express Card Electromechanical Specification, revision 2.0. 2.5″ modules width same as 2.5” drive (SFF-8223, 2007) specification PCI Express X4 lanes. 25W con.
- Connectivity Solutions Page 2 PCI Connector: Multifunction 12 Gb/s 6X Unshielded Connector (SFF-8639) Chipset Power Consumption: 9.8W without M.2 modules installed Operating Humidity: 0%–90%, non-condensing Operating Temperature: 0°C – 45°.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the M20SSD datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=m20ssd-silicom-ltd