M190A1-L07 overview
M190A1-L07 is a component documented by Chi Mei Corporation. The PDF description identifies it as "TFT LCD Approval Specification." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Chi Mei Corporation.
- Part number: M190A1-L07
- Category: IC
- Datasheet length: 25 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- x 900 pixel - Pixel Pitch 0.285 (H) x 0.285 (V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 16.7M color - Transmissive Mode Normally White - - Color saturation 72%NTSC (typ.) - - Surface Treatment Hard coating (3H), Anti.
- Unit Note Horizontal(H) 426.7 427.2 427.7 mm Vertical(V) 276.9 277.4 277.9 mm Module Size Depth(D) - 16.0 16.5 mm (1) Weight - 1850 1900 g - Note (1) Please refer to the attached drawings for more information of front and back outline dime.
- Note (3) 11ms, half sine wave, 1 time for ± X, ± Y , ± Z.
- Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y , Z.
- Unit Note Power Supply Voltage Vcc -0.3 +6.0 V Logic Input Voltage V IN -0.3 4.3 V (1) Value Item Symbol Min.
- Unit Note Lamp Voltage VL - 2.0K V RMS (1), (2), I L = 7.0mA Lamp Current IL - 7.5 mA RMS Lamp Frequency FL - 80 KHz (1), (2) Note (1) Permanent damage to the device may occur if maximum values are exceeded.
- Unit Note Power Supply Voltage Vcc 4.5 5.0 5.5 V - Ripple Voltage VRP - - 100 mV - Rush Current IRUSH - 1.6 3 A (2) White 0.5 0.7 A (3)a Black 0.7 1.0 A (3)b Power Supply Current Vertical Stripe - 0.7 1.0 A (3)c LVDS differential input vol.
Topics covered by the datasheet
The document includes sections related to:
- REVISION HISTORY
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the M190A1-L07 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=m190a1-l07-chi-mei-corporation