LMX321 overview

LMX321 is a component documented by Maxim Integrated Produc. The PDF description identifies it as "Single/Dual/Quad, General-Purpose, Low-Voltage, Rail-to-Rail Output Op Amps." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Maxim Integrated Produc...
  • Part number: LMX321
  • Category: Amplifier
  • Datasheet length: 13 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
  • Output Short-Circuit Duration Continuous Power Dissipation (TA = +70°C) PARAMETER SYM B O L CONDITIONS MIN TYP MAX UNITS DC Characteristics Input Offset Voltage V OS 16m V Input Offset Voltage Average Drift TCVOS 6 µV/ o C Input Bias Curre.
  • All temperature limits are guaranteed by design. (VCC = +5V, VEE = 0, VOUT = VCC/2, VCM = 2V, RL > 1MΩ , TA = -40°C to +125°C , unless otherwise noted.) (Note 1) PARAMETER SYM B O L CONDITIONS MIN TYP MAX UNITS DC Characteristics Input Off.
  • OUTPUT VOLTAGE LMX321 toc03 OUTPUT VOLTAGE REFERENCED TO VCC (V) SOURCE CURRENT (mA) VCC = 2.7V 100 0.1 0.01 0.01 1 0.1 10 SOURCE CURRENT vs.
  • OUTPUT VOLTAGE LMX321 toc04 OUTPUT VOLTAGE REFERENCED TO VCC (V) SOURCE CURRENT (mA) VCC = 5V 100 0.1 0.01 0.001 0.01 1 0.1 10 SINK CURRENT vs.
  • OUTPUT VOLTAGE LMX321 toc05 OUTPUT VOLTAGE REFERENCED TO VEE (V) SINK CURRENT (mA) VCC = 2.7V 100 0.1 0.01 0.001 0.01 1 0.1 10 SINK CURRENT vs.
  • OUTPUT VOLTAGE LMX321 toc06 OUTPUT VOLTAGE REFERENCED TO VEE (V) SINK CURRENT (mA) VCC = 5V 100 24 35 6 7 OUTPUT VOLTAGE SWING vs.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Ordering Information
  • ELECTRICAL CHARACTERISTICS
  • Package Information

Engineering review checklist

  • Verify supply range, input common-mode range and output swing at the required load.
  • Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
  • Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the LMX321 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=lmx321-maxim-integrated-produc

LMX321 Maxim Integrated Produc... Amplifier LMX321 datasheet LMX321 specifications LMX321 applications