LD151 overview
LD151 is a component documented by LightGraphix. The PDF description identifies it as "HIGH-POWER INTERIOR/EXTERIOR LED UPLIGHT 21 May 2026." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: LightGraphix
- Part number: LD151
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- When pushed into the sleeve it creates a watertight seal. /SC Spring clip fixing Suitable for use in surfaces with a thickness of 1mm – 25mm.
- DIMENSIONS AND FIXING ACCESSORIES Dimensions in mm /484N or /484N-2 Concrete housing Must be used when specifying the 700mA fitting.
- GLARE SHIELD OPTIONS | Data sheet issued: 21 May 2026 E3 LED Engine Cone diagrams below are based on a 3000K E3 LED engine run at maximum output 700mA, 10W.
- Images below represents beam outputs when wall washing a 3m wall, spaced 125mm away from the lit surface.
- Photometric files (LDT) are included in the design pack which can be downloaded from the LD151 product page on the website. /OB 90° Rotation /MSB /WB /WWB Rotation /OB Medium Spot Beam 700mA using a 25° optic LD150-E1-700 / LW30 / NB (10°).
- Drivers Use with 350mA, 500mA & 700mA constant current LED drivers We have a range of dimmable LED drivers DMX and DALI compatible.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
- Derate light output and lifetime for junction temperature and the actual PCB thermal path.
- Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the LD151 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ld151-lightgraphix