LCBA6SG overview
LCBA6SG is a component documented by OSRAM GmbH. The PDF description identifies it as "Coupling into light guides." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: OSRAM GmbH
- Part number: LCBA6SG
- Category: IC
- Datasheet length: 23 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Version 1.0 LCB A6SG 2013-09-20 3 Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ...
- 110 °C Storage temperature range Lagertemperatur Tstg -40 ...
- 110 °C Junction temperature Sperrschichttemperatur Tj 125 °C Forward current Durchlassstrom (TS = 25 °C) IF 5 ...
- to ANSI/ESDA/JEDEC JS-001 - HBM) V ESD up to 2 kV Version 1.0 LCB A6SG Characteristics (TS = 25 °C; IF = 20 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Chromaticity coordinates acc.
- to CIE 1931 2) page 22 Farbkoordinaten nach CIE 1931 2) Seite 22 (typ.) (typ.) Cx Cy 0.2 0.3 Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 ϕ 120 ° Forward voltage 3) page 22 Durchlassspannung 3) Seite 22 (min.) (typ.) (max.).
- Version 1.0 LCB A6SG 2013-09-20 9 Relative Spectral Emission - V( λ) = Standard eye response curve 6) page 22 Relative spektrale Emission - V( λ) = spektrale Augenempfindlichkeit 6) Seite 22 Irel = f (λ); TS = 25 °C; IF = 20 mA Radiation C.
- zulässiger Durchlassstrom IF = f (T) Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit I F = f(tp) D: Duty cycle, TA = 25 °C Permissible Pulse Handling Capability Zulässige Impulsbelastbarkeit I F = f(tp) D: Duty cycle, T.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Ordering Information
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the LCBA6SG datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=lcba6sg-osram-gmbh