LC786800E overview
LC786800E is a component documented by ON Semiconductor. The PDF description identifies it as "Compressed Audio signal Processor IC Sep 2013 Ver. 1.0.0." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: LC786800E
- Category: IC
- Datasheet length: 26 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Several pins are 5V tolerant.) External interrupt pins 4 pins maximum (Shared with other functions.) Serial interface SIO clock synchronized full duplex (3 lines) 3 channels UART full duplex 2 channels IIC master function 1 channel <Pr.
- It is possible if desired to connect C2 error flag. Others <Internal power supply> 1.5V regulator for internal blocks No.A2082-5/26 Specifications Parameter Symbol Pin names Conditions Ratings Unit Maximum supply voltage V DD max DV DD.
- Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
- No.A2082-6/26 Parameter Symbol Pin names Conditions min typ max Unit Current drain I DD1 DV DD, AVDD1, AVDD2, XVDD, VVDD2, VVDD3 85 135 mA High-level input current I IH(1) RESB, SIFCK, SIFDI, SIFDO, SIFCE, BUSYB, GP03, GP04, GP05, GP06, GP.
- This pin must be connected to the 0V level.
- This pin must be connected to the 0V level. (Connect to pull-down resistor or 0V level in normal mode.) (Connect to pull-down resistor or 0V level in normal mode.) (Connect to pull-down resistor or 0V level in normal mode.) (Connect to pul.
- However, it is necessary to supply a regulated voltage to the power supply beforehand when more than 3.6V voltage is input to the 5V tolerant input pins.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the LC786800E datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=lc786800e-on-semiconductor