LBD-075S100BSF overview

LBD-075S100BSF is a component documented by Inventronics Inc. The PDF description identifies it as "75W Programmable IP20 Driver with DALI Rev. B." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Inventronics Inc.
  • Part number: LBD-075S100BSF
  • Category: Driver IC
  • Datasheet length: 11 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • Notes Input Voltage 176 V - 305 V Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.70 mA IEC60598-1; 240Vac/ 60Hz Input AC Current - - 0.50 A Measured at 100% load and 220 Vac input.
  • Inrush Current(I2t) - - 1.12 A2s At 220Vac input, 25C Cold Start, Duration =528μs, 10%Ipk-10%Ipk.
  • Notes Output Current Tolerance -5%Ioset - 5%Ioset At 100% load condition Output Current Setting(Ioset) Range 7%Iomax - 100%Iomax Output Current Setting Range with Constant Power 70%Iomax - 100%Iomax Total Output Current Ripple (pk-pk).
  • Startup Overshoot Current - - 10 %Iomax At 100% load condition DISCONTINUED Specifications are subject to changes without notice.
  • Tc curve for the details Operating Case Temperature for Safety Tc_s -30 °C - +87 °C Operating Case Temperature for Warranty Tc_w -30 °C - +75 °C Humidity: 10% RH to 90% RH; No Condensation.
  • Storage Temperature -30 °C - +85 °C Humidity: 5% RH to 90% RH.
  • R2 4.16 kOhm When R_NTC is less than R2, output current is reduced to the programmed “Protection Current Floor.” Protection Current Floor 10%Ioset 60%Ioset 100%Ioset 10%Ioset > Iomin (default setting is 60%) Iomin 60%Ioset 100%Ioset 10%Ios.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Description
  • Revision History

Engineering review checklist

  • Verify forward current and voltage, optical bin, wavelength or color coordinates and viewing geometry.
  • Derate light output and lifetime for junction temperature and the actual PCB thermal path.
  • Confirm polarity, footprint, reflow profile and moisture-sensitivity handling before production.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the LBD-075S100BSF datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=lbd-075s100bsf-inventronics-inc

LBD-075S100BSF Inventronics Inc. Driver IC LBD-075S100BSF datasheet LBD-075S100BSF specifications LBD-075S100BSF applications