KTU1120EGAB-TA overview

KTU1120EGAB-TA is a component documented by Kinetic Technologies. The PDF description identifies it as "USB Type-C Port Protector for CC and SBU Pins August 2021 - Revision 04a." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Kinetic Technologies.
  • Part number: KTU1120EGAB-TA
  • Category: Interface
  • Datasheet length: 2 Pages

Key features noted in the PDF

  • Over-Voltage Protection  24VDC Tolerance on CC1/2, SBU1/2  CC1/2 OVP = 5.8V  SBU1/2 OVP = 3.83V  Ultra-Fast 15ns Response Time
  • IEC61000-4-5 Surge Protection  ±40V Surge Tolerance on CC1/2  ±30V Surge Tolerance on SBU1/2
  • IEC61000-4-2 ESD Protection  ±15kV air gap on CC1/2, SBU1/2  ±8kV contact on CC1/2, SBU1/2  ±2kV HBM on all pins (JEDEC JS-001-2017)
  • CC Switches:  1.25A, 270mΩ, 40pF, 140MHz  Automatic 5.1kΩ dead battery pull-down
  • SBU Switches:  3Ω, 11pF, 800MHz
  • 2.5V to 5.5V Operating Supply Voltage Range
  • 40°C to 85°C Operating Temperature Range

Applications listed in the PDF

  • Notebook PCs, Netbooks, Tablets, Monitors, TVs
  • Gaming Devices, Set-Top Boxes, Networking Typical Application KTU1120 SBU SWITCHES SB1S SB2S DP AUX, UART, ADC, etc. CC SWITCHES CC1 CC2 CC1S CC2S SBU1 SBU2 TYPE-C PD PORT CNTLRU.

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • The CC1/2 switches have low on -resistance for passing V CONN power up to 1.25A.
  • During dead battery conditions, internal 5.1kΩ resistors automatically pull down on CC1/2 to ensure that the up- stream source provides 5V on VBUS.
  • The KTU1120 is packaged in RoHS and Green compliant 16-bump WLCSP 1.7mmx1.7mm package.
  • CC SWITCHES CC1 CC2 CC1S CC2S SBU1 SBU2 TYPE-C PD PORT CNTLRU S B P O R T VBUS SYSTEM CPU GND VSYS 1uF VCC CESD GND 0.1uF INTERFACE LOGIC FLAG RPD_G1 RPD_G2 USB Type-C Port Protector for CC and SBU Pins For full datasheet, click HERE.
  • August 2021 - Revision 04a Page 2 Kinetic Technologies Confidential Part Number Marking1 Operating Temperature Package KTU1120EGAB-TA RMXXYYZZZZ -40°C to +85°C WLCSP44-16 1.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Applications
  • Ordering Information

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the KTU1120EGAB-TA datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=ktu1120egab-ta-kinetic-technologies

KTU1120EGAB-TA Kinetic Technologies. Interface KTU1120EGAB-TA datasheet KTU1120EGAB-TA specifications KTU1120EGAB-TA applications