KTG1205C overview
KTG1205C is a component documented by Kingstate Electronics C. The PDF description identifies it as "Magnetic Buzzer." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Kingstate Electronics C...
- Part number: KTG1205C
- Category: IC
- Datasheet length: 6 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 請參照外觀尺寸圖 Environmental Protection Regulation 環保法規 RoHS 保存期限 month 6 6 months preservation at room temp.(25±3℃), Humidity40% 在室溫下25±3℃,濕度 40%以下可保存6 個月.
- TYPICAL FREQUENCY RESPONSE CURVE 頻率響應曲線 CONSUMPTION VOLTAGE-CURRENTVOLTAGE-SOUND PRESSURE LEVEL 志豐電子股份有限公司 KINGSTATE ELECTRONICS CORP 3/6 KTG1205C D.
- 振動測試 Buzzer shall be measured after being applied vibration of amplitude of 1.5mm with 10 to 55hz band of vibration frequency to each of 3 per-pendicular directions for 2 hours.
- 振動週波數10～55HZ、全振幅1.5mm 於 X.Y .Z 3個方向,各 2 小 落下測試 The part only shall be dropped from a height of 75cm onto a 40mm thick wooden board 3 times in 3 axes (X.Y .Z). (a total of 9 times).
- One cycle shall be 24 hours and consist of; 單體承受溫度/溼度循環測試10 次.其循環內容如圖示 +85 ℃ a,b : 90~98%RH c : 80~98%RH a b +25℃ 3hrs 12±0.5hrs 3 hrs c 24hours After the test the part shall meet specifications with-out any degradation in appearance and p.
- Recommended Temperature Profile For Reflow Oven 建議迴焊爐溫度曲線 Time [sec] Peak Temp 217°C 260°C 溫 度 60~180sec 60~150sec SMT Reflow Temperature Profile (Pb_Free) 255°C 20~40 sec 150°C 200°C J.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the KTG1205C datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ktg1205c-kingstate-electronics-c