KPT5 overview
KPT5 is a component documented by Bertech. The PDF description identifies it as "5 Mil Kapton Tape." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Bertech.
- Part number: KPT5
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- It has been used in applications at temperatures as low as -73°C (-99°F) and as high as 260°C (500°F).
- Features: Thin and conformable enabling masking of uneven surfaces Wide operating temperature range up to 500°F Removes cleanly without adhesive residue after exposure to heat High performance silicone adhesive High strength backing provid.
- Elongation 50 % Dielectric Strength 19,000 volts Operating Temperature -73°C (-99°F) - 260°C (500°F) Resistance to acids, oils, solvents Excellent Length 36 Yards Kapton® is a trademark of Dupont (1) Specifications are subject to change at.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the KPT5 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=kpt5-bertech