KPEG243 overview
KPEG243 is a component documented by Kingstate Electronics C. The PDF description identifies it as "Piezo Audio Indicator." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Kingstate Electronics C...
- Part number: KPEG243
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- range 操作電壓範圍 VDC 9 ~ 16 消耗電流 mA MAX 35 at 12VDC 輸出音壓 dB MIN 80 at 30cm/12VDC 額定電壓 VDC 12 聲音 Continuous 直音 at 12VDC 7 Operating temp.
- G ：Hewlett Packard 33120A Function Generator or equivalent S.G ：Hewlett Packard 33120A 函數信號產生器或同等品 E.
- VOLTAGE: SOUND PRESSURE LEVEL / VOLTAGE: CURRENT CONSUMPTION CHARACTERISTICS 電壓與音壓/電壓與耗電流之特性 Voltage(VDC) 85Sound Pressure Level(dB) I 100 at 30cm Current Consumption(mA) 14 16 P 志豐電子股份有限公司KINGSTATE ELECTRONICS CORP 4/5 KPEG243 F.
- 振動試驗 Buzzer shall be measured after being applied vibration of amplitude of 1.5mm with 10 to 55hz band of vibration frequency to each of 3 per-pendicular directions for 2 hours.
- 落下測試 The part only shall be dropped from a height of 75cm onto a 40mm thick wooden board 3 times in 3 axes (X.Y .Z). (a total of 9 times).
- The value of oscillation frequency/ current consumption should be in ±10% compared with initial ones .The SPL should be in ±10dB compared with initial one.
- 經測試後, 靜置於+25℃（室溫） 環境中4 小時後 ,諧振頻率與消耗 電流變化量須在±10%內.
Engineering review checklist
- Verify contact current, voltage, contact resistance, insulation and mating-cycle ratings.
- Check the exact keying, pitch, orientation, mating part and mechanical drawing before footprint approval.
- Review assembly force, retention, cable strain relief and environmental exposure for the application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the KPEG243 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=kpeg243-kingstate-electronics-c