IPTG26A18-11SZC overview
IPTG26A18-11SZC is a component documented by Glenair, Inc. The PDF description identifies it as "Box Mount Rear Flange Plug Connector." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Glenair, Inc.
- Part number: IPTG26A18-11SZC
- Category: IC
- Datasheet length: 2 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- IPT 26 A Box Mount Rear Flange Plug Connector APPLICATION NOTES 1.
- G HM IPT G 26 A 18-11 S Z C XX MIL-C-26482 Series l Type Grounding Finger (Omit for Standard) 26 - Box Mount Square Flange Plug Connector Class A - Non-Environmental Shell Size and Insert Arrangements Mod Code Options See Table II Contact.
Engineering review checklist
- Verify capacitance tolerance, rated voltage, temperature range and any DC-bias derating.
- Check ESR, ripple-current capability, lifetime and polarity requirements under worst-case conditions.
- Confirm package dimensions, land pattern and reflow or mounting limits for the selected ordering code.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the IPTG26A18-11SZC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=iptg26a18-11szc-glenair-inc