IPB60R600CP overview
IPB60R600CP is a component documented by Infineon Technologies A. The PDF description identifies it as "CoolMOS Power Transistor Rev.2.0 2008-02-15." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Infineon Technologies A...
- Part number: IPB60R600CP
- Category: IC
- Datasheet length: 10 Pages
Key features noted in the PDF
- Lowest figure-of-merit RON x Qg
- Ultra low gate charge
- Extreme dv/dt rated
- High peak current capability
- Qualified according to JEDEC1) for target applications
- Pb-free lead plating; RoHS compliant CoolMOS CP is designed for:
- Hard switching SMPS topologies Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Unit Continuous drain current I D T C=25 °C A T C=100 °C Pulse.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Thermal characteristics Thermal resistance, junction - case R thJC - - 2.1 K/W R thJA leaded - - 62 R thJA SMD version, device on PCB, minimal footprint -- 6 2 SMD version, device on PCB, 6 cm 2 cooling area3) -3 5- Electrical characterist.
- V R=400 V, I F=I S, di F/dt =100 A/µs 6) C o(tr) is a fixed capacitance that gives the same charging time as C oss while V DS is rising from 0 to 80% V DSS.
- 4) ISD=ID, di/dt≤400A/µs, VDClink=400V, Vpeak<V(BR)DSS, Tj<Tjmax, identical low side and high side switch.
- drain-source on-state resistance I D=f(V DS); T j=150 °C R DS(on)=f(I D); T j=150 °C parameter: V GS parameter: V GS 7 Drain-source on-state resistance 8 Typ.
- gate charge 10 Forward characteristics of reverse diode V GS=f(Q gate); I D=3.3 A pulsed I F=f(V SD) parameter: V DD parameter: T j E AS=f(T j); I D=2.2 A; V DD=50 V V BR(DSS)=f(T j); I D=0.25 mA 25 °C150 °C 25 °C, 98% 150 °C, 98% 102 101.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the IPB60R600CP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ipb60r600cp-infineon-technologies-a