IMP813 overview
IMP813 is a component documented by IMP, Inc. The PDF description identifies it as "LOW-POWER 關P SUPERVISOR CIRCUITS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: IMP, Inc
- Part number: IMP813
- Category: IC
- Datasheet length: 9 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- A reset is generated when the supply drops below 4.65V (IMP705/707 /813L) or 4.40V (IMP706/708).
- For 3V power supply applications, refer to the IMP705P/R/S/T data sheet.
- A versatile power-fail circuit has a 1.25V threshold, useful in checking battery levels and non-5V supplies.
- Key Features N Improved replacements for the Maxim MAX705/6/7/8, MAX813L – 140µA maximum supply current – 60% improvement N Precision power supply monitor – 4.65V threshold (IMP705/707 /813L) – 4.40V threshold (IMP706/8) N Debounced manual.
- The input voltage limits on PFI and MR can be exceeded if the input current is less than 10mA.
- A 250 µA pull-up current allows the pin to be driven by TTL / CMOS logic or shorted to ground with a switch.
- With PFI less than 4 6 4 6 4 6 PFI 1.25V, PFO goes low.
Topics covered by the datasheet
The document includes sections related to:
- Applications
- Ordering Information
- Electrical Characteristics
- Application Information
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the IMP813 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=imp813-imp-inc