IMP708JCUA overview
IMP708JCUA is a component documented by IMP, Inc. The PDF description identifies it as "3/3.3/4.0V 關P SUPERVISOR CIRCUITS." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: IMP, Inc
- Part number: IMP708JCUA
- Category: IC
- Datasheet length: 8 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 200µA N Precision power supply monitor – 2.63V threshold (IMP706P/R, IMP708R) – 2.93V threshold (IMP706S, IMP708S) – 3.08V threshold (IMP706T, IMP708T) – New 4.00V threshold (IMP706J, IMP708J) N Debounced manual reset input N Auxiliary vol.
- A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R), 2.93V (IMP706S, IMP708S), 3.08V (IMP706T, IMP708T) or 4.00 (IMP706J, IMP708J).
- A versatile power-fail circuit, useful in checking battery levels and non-5V supplies, has a 1.25V threshold.
- Unless otherwise noted, specifications are over the operating temperature range and V CC supply voltages are 2.7V to 5.5V (IMP706P , Electrical Characteristics (cont.) retemaraPl obmySs noitidnoCn iMp yTx aMs tinU egatloVtuptuOTESER P607PM.
- It is compatible with TTL/CMOS signals when VCC = 5V.
- With PFI less than 4 6 4 6 4 6 PFI 1.25V, PFO goes LOW.
- The output is active LOW and 5 7 5 7 5 7 PFO sinks current when PFI is less than 1.25V.
Topics covered by the datasheet
The document includes sections related to:
- Applications
- Ordering Information
- Electrical Characteristics
- Application Information
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the IMP708JCUA datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=imp708jcua-imp-inc