ILC707M overview
ILC707M is a component documented by Impala Linear Corporati. The PDF description identifies it as "MP SUPERVISORY CIRCUIT." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Impala Linear Corporati...
- Part number: ILC707M
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Supply voltage monitor levels of 4.65V and 4.4V are available.
- The ILC705/ILC707 have a nominal reset threshold level of 4.65V while the ILC706 and ILC708 have a 4.4V nominal reset threshold level.
- 4.4V or 4.65V Precision Voltage Monitor !
- Range ILC70_N 8-Lead PDIP -40°C to +85°C ILC70_M 8-Lead SOIC -40°C to +85°C ILC705 ILC706 µµP VCC +5 V (Regulated) VCC WDI NMIWDO GNDPFI I/O Line MR RESET RESET Manual Reset DC Voltage (Unregulated) InterruptPFO Typical CircuitPin Package.
- Parameter Conditions Min Typ Max Units Operating Voltage Range, VCC ILC70__ 1.4 5.5 V Supply Current, ICC ILC70__ 60 µA Reset Voltage Threshold ILC705, ILC707 ILC706, ILC708 4.5 4.25 4.65 4.4 4.75 4.5 V Reset Threshold Hysteresis 40 mV Res.
- MR forces RESET to assert when pulled below 0.8V.
- An internal pull-up current of 250 mA on this input forces it high when left floating.
Topics covered by the datasheet
The document includes sections related to:
- Applications
- Ordering Information
- Description
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ILC707M datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ilc707m-impala-linear-corporati