ILC555D overview
ILC555D is a component documented by Integral Corp. The PDF description identifies it as "CMOS general purpose timer." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Integral Corp.
- Part number: ILC555D
- Category: IC
- Datasheet length: 5 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Improved parameters include low supply current, wide operating supply voltage range, low THRESHOLD, TRIGGER and RESET currents, no crowbarring of the supply current during output transitions, higher frequency performance and no requirement.
- High speed operation – 500 kHz guaranteed.
- Wide operation supply voltage range – 2 to 18 volts.
- High output source/sink driver can drive TTL/CMOS THRESHOLD TRIGGER RESET OUTPUT DISCHARGE X X L L ON > 2/3⋅VCC > 1/3⋅VCC H L ON < 2/3⋅VCC > 1/3⋅VCC H STABLE STABLE X < 1/3⋅VCC H H OFF MAXIMUM RATINGS AND RECOMMENDED OPERATING CONDITIONS R.
- M 0.2 0.36 Maximum mold flash or protrusions 0.25 mm (0.010) per side.
- N 0.38 D SU F F I X SOI C (MS - 012AA) Sym b ol M I N M AX A 4.8 5 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G H J 0° 8° NOTES: K 0.1 0.25 Dim ensions A and B do not include m old flash or protrusion.
- M 0.19 0.25 1.27 5.72 Dimens ion, mm Dimens ion, mm 2.54 7.62 A BH C K C M J F M P G D R x 45 SEA TING PLANE 0.25 (0.010) M T -T- L H M J A B F G D SEATING PLANE N K 0.25 (0.010) M T -T- C
Topics covered by the datasheet
The document includes sections related to:
- ORDERING INFORMATION
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ILC555D datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ilc555d-integral-corp