IH5145CWE overview
IH5145CWE is a component documented by Maxim Integrated Produc. The PDF description identifies it as "Low Power Fast CMOS Analog Switches." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Maxim Integrated Produc...
- Part number: IH5145CWE
- Category: IC
- Datasheet length: 4 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- These switches are latch-up @ Break-Before-Make Switching Action a proof, break-before-make single and dual versions @ Fast tow (80ns typ.) and torr (50ns) mv of all the popular switch formats — SPST, SPDT, and DPST.
- Key features of the family include toggle rates !nput Signal Range Includes Supply Ralls in excess of 1MHz, ton times of 80ns typical and @ Guaranteed +4.5V to +18V Operation N tog times of 50ns.
- OFF leakage current is less than _ 1Q0pA maximum at +25°C and quiescent currents # Low OFF Leakage Current — 100pA max. = are 1uA maximum, making the switches ideal for @ Greater than 1MHz Toggle Rate \\ Portable equipment. @ TTL and CMOS.
- RANGE PACKAGE | supplies. ‘SINGLE POLE SINGLE THROW (SPST) > _ Applications IH5140C/D 0°C to +70°C DICE .
- z IHS140CJE 0°C to +70°C 16 Lead CERDIP High Speed Test Equipment eo > 9 gulps THSI4OCPE—O°Cto 170°C t6Lead Plastic IP) =O Sample and Hold Circuits SE aR RasO"O OE Lead THS140CWE OCt0+70°C _16 Lead Wide SO a Guidance and Control Systems HS.
- cocscs = 30mA Vp eV" cecesesceses cee <30V (All Leads Soldered to a PC.
- Board) VL-GND oo! : DT «20 NN Derate 6mW/*C Above +70°C Viv-GND 20v Voltages Vg.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the IH5145CWE datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=ih5145cwe-maxim-integrated-produc