HS1F750B overview
HS1F750B is a component documented by Emerson Network Power. The PDF description identifies it as "Automation Transformers - Non-Ventilated 50 VA to 45 kVA July 2020." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Emerson Network Power
- Part number: HS1F750B
- Category: IC
- Datasheet length: 10 Pages
Key features noted in the PDF
- UL Listed/NEMA Type 3R non encapsulated enclosure for indoor and outdoor service
- Low temperature rise, UL Class I30 ˚C insulation system, 80 ˚C temperature rise under full load
- Conduit knockouts for side entry into wiring compartment
- Copper lead wire terminations Single Phase: 0.500 - 25 kVA Three Phase: 3 - 45 kVA
- Available as standard in Cold Rolled Steel or Painted Stainless Steel
- UL Listed/NEMA Type 3R encapsulated enclosure for indoor and outdoor service
- Electrostatically shielded for quality power on sizes 1 kVA and larger
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Dry Type Distribution Transformers Group A: 480 Volt Δ Primary, 208Y/120 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Steel 3 Height in (mm) Width in (mm) Depth in (mm) Approx.
- Group D: 240 Volt Δ Primary, 208Y/120 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Steel 3 Height in (mm) Width in (mm) Depth in (mm) Approx.
- Ship Weight lbs (kg) Design Style 1 Elec Conn 1 Primary Amps Secondary Amps Selection Tables: Three Phase Group B: 208 Volt Δ Primary, 208Y/120 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Stee.
- Ship Weight lbs (kg) Design Style 1 Elec Conn 1 Primary Amps Secondary Amps Selection Tables: Three Phase Group F: 600 Volt Δ Primary, 208Y/120 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Stee.
- Ship Weight lbs (kg) Design Style 1 Elec Conn 1 Primary Amps Secondary Amps Group G: 208 Volt Δ Primary, 480Y/277 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Steel 2 Height in (mm) Width in (m.
- Ship Weight lbs (kg) Design Style 1 Elec Conn 1 Primary Amps Secondary Amps Group H: 240 Volt Δ Primary, 480Y/277 Secondary, 60 Hz kVA Catalog Number Group I Rolled Steel Catalog Number Group II Stainless Steel 2 Height in (mm) Width in (m.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Related Products
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the HS1F750B datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=hs1f750b-emerson-network-power