HB32 overview

HB32 is a component documented by Texas Instruments. The PDF description identifies it as "QUADRUPLE 2-INPUT POSITIVE-OR GATES." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Texas Instruments
  • Part number: HB32
  • Category: Logic IC
  • Datasheet length: 23 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
  • The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
  • electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C SN54AHCT32 SN74AHCT32 UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX MIN MAX UNIT VOH.
  • switching characteristics over recommended operating free-air temperature range, VCC = 5 V± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO LOAD TA = 25°C SN54AHCT32 SN74AHCT32 UNITPARAMETER FROM (INPUT) TO (OUTPUT) LOAD CA.
  • operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT C pd Power dissipation capacitance No load, f = 1 MHz 11.5 pF NOTES: A.
  • All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.

Topics covered by the datasheet

The document includes sections related to:

  • SN54AHCT32_07 TI
  • ORDERING INFORMATION
  • applications

Engineering review checklist

  • Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
  • Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
  • Validate electrical, thermal, mechanical and environmental behavior in the final application.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the HB32 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=hb32-texas-instruments

HB32 Texas Instruments Logic IC HB32 datasheet HB32 specifications HB32 applications