H2A overview
H2A is a component documented by Zemic Europe B.V. The PDF description identifies it as "Type H2A Load Cell 2022.05." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Zemic Europe B.V.
- Part number: H2A
- Category: IC
- Datasheet length: 3 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- LC Verification Interval Y = Emax / vmin 1500 Combined Error %FS ≤± 0.2 ≤± 0.3 ≤± 0.5 ≤± 1.0 Creep Error (30 minutes) %FS ≤± 0.05 Temperature Effect on Zero (ZTC) %FS/10°C ≤± 0.2 Temperature Effect on Sensitivity (STC) %FS/10°C ≤± 0.2 Zero.
- to EN 60529) IP67 Recommended Torque on Fixation Bolts Nm M16: 200 Wiring Features: Cable type: Shielded, 4 conductor cable , conductor AWG 24 Cable diameter: Ø 5.0mm Cable length: 5m Cable jacket: Crosslinked Polyethylene Shield not conne.
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the H2A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=h2a-zemic-europe-b-v