GP1006 overview
GP1006 is a component documented by Taiwan Semiconductor Co. The PDF description identifies it as "10.0 AMPS. Glass Passivated Rectifiers." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Taiwan Semiconductor Co...
- Part number: GP1006
- Category: IC
- Datasheet length: 2 Pages
Key features noted in the PDF
- 551 - FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 125 100 150 175 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Single phase, half wave, 60 Hz, resistive or inductive load.
- Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the GP1006 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=gp1006-taiwan-semiconductor-co