GBJ606U overview
GBJ606U is a component documented by HY ELECTRONIC CORP. The PDF description identifies it as "Low VF Glass Passivated Bridge Rectifiers." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HY ELECTRONIC CORP.
- Part number: GBJ606U
- Category: IC
- Datasheet length: 3 Pages
Applications listed in the PDF
- General purpose use in AC/DC bridge full wave rectification, for SMPS, lighting ballaster, adapter, etc. Maximum Ratings and
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Single phase, half wave, 60Hz, resistive or inductive load.
- Characteristics Symbol Unit Maximum Repetitive Peak Reverse Voltage VRRM V Maximum RMS Voltage VRMS V Maximum DC Blocking Voltage VDC V Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) Peak Forw.
- Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
- 2.Device mounted on 75mm*75mm*1.6mm Cu plate heatsink.
- 11, 18-May-2020 0.1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig.
- 4 - Typical Forward Characteristics Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig.
- 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz Peak Forward Surge Current (A) 100 120 140 160 180 200 1 10 100 8.3mS Single Half-Sine-Wave (JEDEC METOD) Instantaneous Reverse Current (uA) Fig.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the GBJ606U datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=gbj606u-hy-electronic-corp