GAL16V8D-10LJ overview

GAL16V8D-10LJ is a component documented by Lattice Semiconductor. The PDF description identifies it as "High Performance E2CMOS PLD Generic Array Logic." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Lattice Semiconductor
  • Part number: GAL16V8D-10LJ
  • Category: Logic IC
  • Datasheet length: 22 Pages

Key features noted in the PDF

  • HIGH PERFORMANCE E 2CMOS ® TECHNOLOGY — 3.5 ns Maximum Propagation Delay — Fmax = 250 MHz — 3.0 ns Maximum from Clock Input to Data Output — UltraMOS® Advanced CMOS Technology
  • 50% to 75% REDUCTION IN POWER FROM BIPOLAR — 75mA Typ Icc on Low Power Device — 45mA Typ Icc on Quarter Power Device
  • ACTIVE PULL-UPS ON ALL PINS
  • E2 CELL TECHNOLOGY — Reconfigurable Logic — Reprogrammable Cells — 100% Tested/100% Yields — High Speed Electrical Erasure (<100ms) — 20 Year Data Retention
  • EIGHT OUTPUT LOGIC MACROCELLS — Maximum Flexibility for Complex Logic Designs — Programmable Output Polarity — Also Emulates 20-pin PAL® Devices with Full Function/Fuse Map/Parame.
  • PRELOAD AND POWER-ON RESET OF ALL REGISTERS — 100% Functional Testability
  • APPLICATIONS INCLUDE: — DMA Control — State Machine Control — High Speed Graphics Processing — Standard Logic Speed Upgrade

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • High speed erase times (<100ms) allow the devices to be reprogrammed quickly and ef- ficiently.
  • Vin = VIL or VIH — — 0.5 V VOH Output High Voltage IOH = MAX.
  • PLCC)/-10/-15/-25 — — 24 mA Q-10/-15/-20/-25 IOH High Level Output Current — — –3.2 mA IOS 2 Output Short Circuit Current VCC = 5V VOUT = 0.5V TA= 25°C –30 — –150 mA Recommended Operating Conditions Commercial Devices: Supply voltage (VCC.
  • Vout = 0.5V was selected to avoid test problems caused by tester ground degradation.
  • 3) Typical values are at Vcc = 5V and T A = 25 °C tpd A Input or I/O to Comb.
  • AC Switching Characteristics Over Recommended Operating Conditions MIN.
  • COM Capacitance (TA = 25°C, f = 1.0 MHz) tpd A Input or I/O to Comb.

Topics covered by the datasheet

The document includes sections related to:

  • Features
  • Description

Engineering review checklist

  • Check voltage, continuous and pulsed current, safe operating area and junction-temperature limits.
  • Evaluate conduction and switching losses using the specified drive conditions rather than headline ratings.
  • Confirm pinout, package thermal path, gate or base protection and transient derating in the final circuit.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the GAL16V8D-10LJ datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=gal16v8d-10lj-lattice-semiconductor

GAL16V8D-10LJ Lattice Semiconductor Logic IC GAL16V8D-10LJ datasheet GAL16V8D-10LJ specifications GAL16V8D-10LJ applications