FXLP34 overview
FXLP34 is a component documented by ON Semiconductor. The PDF description identifies it as "Single Bit Uni-Directional Translator March 2011 Rev. 1.0.4." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: FXLP34
- Category: IC
- Datasheet length: 14 Pages
Key features noted in the PDF
- DIMENSIONS ARE IN MILLIMETERS
- CONFORMS TO JEDEC ST ANDARD M0-252 VA RIATION UAAD
- FILENAME AND REVISION: MAC06AREV4
- DRAWING CONFORMS TO ASME Y14.5M-1994
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1.0.4 FXLP34 — Single Bit Uni-Directional Translator FXLP34 Single Bit Uni-Directional Translator 1.0V to 3.6V VCC Supply Voltage Converts Any Voltage (1.0V to 3.6V) to (1.0V to 3.6V) 4.6V Tolerant Inputs and Outputs tPD : - 4ns Ty.
- This device operates with VCC values from 1.0V to 3.6V, and is intended for use in portable applications that require ultra low power consumption.
- The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
- In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
- Unit VCC , VCC1 Supply Voltage -0.5 +4.6 V VIN DC Input Voltage -0.5 +4.6 V VOUT DC Output Voltage HIGH or LOW State(1) -0.5 V CC +0.5V V VCC =0V -0.5 +4.6 IIK DC Input Diode Current V IN < 0 -50 mA IOK DC Output Diode Current VOUT < 0V -5.
- IO Absolute Maximum Rating must be observed.
- Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation.
Topics covered by the datasheet
The document includes sections related to:
- Features
- Description
- Ordering Information
- Electrical Characteristics
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FXLP34 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fxlp34-on-semiconductor