FP6292 overview

FP6292 is a component documented by Feeling Technology Corp. The PDF description identifies it as "Low-Noise Step-Up Current Mode PWM IC." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Feeling Technology Corp...
  • Part number: FP6292
  • Category: IC
  • Datasheet length: 13 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • Recommended Operating Conditions (Note 1) Parameter Symbol Conditions Min.
  • Unit Junction Temperature Range T J -40 +125 °C Operating Temperature Range T A -40 +85 °C Note 1: The device is not guaranteed to function outside its operating conditions.
  • Unit System Supply Input Input Supply Range V CC 2.7 5.5 V Under Voltage Lockout V UVLO 2.2 V Quiescent Current I CC V FB=1.3V, No switching 0.3 mA Average Supply Current I CC V FB=1.0V, Switching 0.5 mA Shutdown Supply Current I CC V EN=G.
  • Output Current 0 20 40 60 80 100 120 140 160 180 200 Output Current (mA) Efficiency (%) VOUT=12V, L=10µH VIN=5.0V VIN=3.7V Efficiency vs.
  • Output Current 0 20 40 60 80 100 120 140 160 180 200 Output Current (mA) Efficiency (%) VOUT=12V, L=10µH VIN=5.0V VIN=3.7V Enable Voltage vs.
  • Input Voltage 0.8 1.0 1.2 1.4 1.6 1.8 2.5 3 3.5 4 4.5 5 5.5 Input Voltage (V) Enable Voltage (V) -40℃ 25℃ 85℃ Switching Frequency vs.
  • Input Voltage 1.19 1.20 1.21 1.22 1.23 1.24 1.25 2.5 3 3.5 4 4.5 5 5.5 Input Voltage (V) Frequency (MHz) Feedback Voltage vs.

Topics covered by the datasheet

The document includes sections related to:

  • DATASHEET SEARCH SITE
  • Features
  • Applications
  • Ordering Information
  • Application Information

Engineering review checklist

  • Verify supply range, input common-mode range and output swing at the required load.
  • Check offset, bias current, noise, bandwidth, slew rate and stability for the intended feedback network.
  • Review supply decoupling, source impedance, capacitive-load behavior and thermal limits in the final layout.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the FP6292 datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=fp6292-feeling-technology-corp

FP6292 Feeling Technology Corp... IC FP6292 datasheet FP6292 specifications FP6292 applications