FM8PE581MCP overview
FM8PE581MCP is a component documented by Feeling Technology Corp. The PDF description identifies it as "OTP-Based 8-Bit Microcontroller." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Feeling Technology Corp...
- Part number: FM8PE581MCP
- Category: Microcontroller
- Datasheet length: 87 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- There are eight oscillator configurations to be chosen from, including the power -saving LF (Low Frequency) oscillator and cost saving internal RC oscillator.
- I_TWDT: Watchdog Timer Stable time required when operating in I_WDT mode (I_WDT bit = 1). = 0, 2.5ms. = 1, 1.25ms.
- HRT: Wakeup time select in HALT mode (when system clock is stopped). = 0, 64*FOSC+160uS. = 1, Power on reset time.
- T16F: Timer HIRC 16MHZ Filter Enable/Disable bit. = 0, Disable Filter. = 1, Enable Timer 16MHZ Filter.
- In this mode, the HIRC frequency is multiplied by 2, as the timer clock source, this clock source using the same Opportunity and Table 2.2.
- In this mode, the frequency multiplier minimum operating voltage limits, please refer to electrical characteristics table item.
- The PWM1 period time can be calculated as follows: Period time of PWM1 = 1024 * Timer1 Pre-scaler rate Timer1 Clock source frequency Similarly, this formula can be used directly on PWM2 to PWM6.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- FEATURES
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FM8PE581MCP datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fm8pe581mcp-feeling-technology-corp