FM8PE531MA overview
FM8PE531MA is a component documented by Feeling Technology Corp. The PDF description identifies it as "OTP-Based 8-Bit Microcontroller." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Feeling Technology Corp...
- Part number: FM8PE531MA
- Category: Microcontroller
- Datasheet length: 55 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- , FM8PE531M BLOCK DIAGRAM PWM0 8-bit PWM1 8-bit Timer1 16-bit RFC 15-bitComparator PORTB PORTASRAM 88-Byte OTP 2K-Wrod Stack 6-level Power-up Timer Oscillator Start-up Timer Power on Reset 8MHZ HIRC 55KHZ LIRC Band Gap Reference 8-bit RISC.
- IRCF2:IRCF0: Internal RC oscillator frequency select bits.
- CPUS: CPU clock source select bit. = 0, CPU clock source is LIRC. = 1, CPU clock source is HIRC, frequency defined by IRCF<2:0> bits.
- WDTSEL1:WDTSEL0 Time-out 0 0 2Sec 0 1 288mS 1 0 72mS 1 1 18mS IRCEN: Internal RC enable bit = 0, Disable internal RC clock source (Power down HIRC). = 1, Enable internal RC clock source.
- Read/Write-POR - - - - - - W-0 W-0 Address Name B7 B6 B5 B4 B3 B2 B1 B0 0x16 PCHBUF - - - - - - 2 MSBs Buffer of PC Legend: - = unimplemented, read as ‘0’, more bits’ default state, please refer to Table 2.3.
- The PWM0 and PWM1 period time can be calculated as follows: Period time of PWM = 256 PWM Clock source frequency The PWM0 duty cycle time can be calculated as follows: Duty cycle time of PWM0 = P0DPR PWM Clock source frequency Similarly, th.
- The HIRC (8M HZ) is a calibrated high -frequency oscillator.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- Description
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FM8PE531MA datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fm8pe531ma-feeling-technology-corp