FM8P59AED overview

FM8P59AED is a component documented by Feeling Technology Corp. The PDF description identifies it as "EPROM/ROM-Based 8-Bit Microcontroller." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.

Datasheet snapshot

  • Manufacturer: Feeling Technology Corp...
  • Part number: FM8P59AED
  • Category: Microcontroller
  • Datasheet length: 49 Pages

Specifications and operating details

The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.

  • RC mode: Outputs with 1/4 the frequency of OSCI to denotes the instruction cycle rate Vdd - Positive supply Vss - Ground Legend: I=input, O=output, I/O=input/output FM8P59B/FM8P59BE Name I/O Description IOA0 ~ IOA7 I/O Bi-direction I/O por.
  • RC mode: Outputs with 1/4 the frequency of OSCI to denotes the instruction cycle rate Vdd - Positive supply Vss - Ground Legend: I=input, O=output, I/O=input/output Rev0.99 Jul 20, 2005 P.5/FM8P59 FEELING TECHNOLOGY FM8P59 series memory is.
  • In this case, if a 430KΩ external resister is connected/disconnected to Vss, the status of IOC0 (IOC1) is read as “0”/”1”.
  • The WDT has a nominal time-out period of 18 ms (without prescaler).
  • The system wake-up delay time is 18ms plus 128 oscillator cycle time.
  • The Power-up Reset Timer provides a nominal 18ms delay after Power-on Reset (POR), Brown-out Reset (BOR), RSTB Reset or WDT time-out Reset.
  • The OST timer provides a 128 oscillator cycle delay (from OSCI input) after the PWRT delay (18ms) is over.

Topics covered by the datasheet

The document includes sections related to:

  • FEATURES

Engineering review checklist

  • Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
  • Derate continuous power for ambient temperature and verify pulse or surge capability separately.
  • Match the land pattern, termination finish and current-sense routing to the exact package option.

Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.

View the complete PDF and model record

Open the FM8P59AED datasheet and model details to review the complete PDF, document pages and available product information.

Source attribution

Adapted from the PDF associated with this DigiCamel model page.

Source model URL: https://www.digicamel.com/product.php?slug=fm8p59aed-feeling-technology-corp

FM8P59AED Feeling Technology Corp... Microcontroller FM8P59AED datasheet FM8P59AED specifications FM8P59AED applications