FM8P51 overview
FM8P51 is a component documented by Feeling Technology Corp. The PDF description identifies it as "EPROM/ROM-Based 8-Bit Microcontroller." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Feeling Technology Corp...
- Part number: FM8P51
- Category: Microcontroller
- Datasheet length: 60 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- RC mode: Outputs with 1/4 the frequency of OSCI to denotes the instruction cycle rate CKOUT O Oscillator frequency output with high driving ability and output phase selection RSTB I System clear (RESET) input.
- In this case, if a 430KΩ external resistor is connected/disconnected to Vss, the status of IOD0 (IOD1) is read as “0”/”1”.
- The WDT has a nominal time-out period of 18 ms (without prescaler).
- Thus, the longest time-out period is approxmately 2.3 seconds if reset delay time is set to 18ms.
- Rev1.3 Mar 21, 2006 P.35/FM8P51 FEELING TECHNOLOGY The Resistor to Frequency Converter (RFC) can compare nineteen different sensors with the reference resistor separately.
- The system wake-up delay time is 18ms plus 128 oscillator cycle time.
- The Power-up Reset Timer provides a nominal 18/4.5/288/72ms delay after Power-on Reset (POR), Brown-out Reset (BOR), RSTB Reset or WDT time-out Reset.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FM8P51 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fm8p51-feeling-technology-corp