FD0259fR-G1 overview
FD0259fR-G1 is a component documented by Feeling Technology Corp. The PDF description identifies it as "Smart motor driver with embedded Hall sensor." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Feeling Technology Corp...
- Part number: FD0259fR-G1
- Category: Driver IC
- Datasheet length: 12 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Thermal-shutdown protection (TSD) ensures the internal driver of IC is operating under the safe operating temperature range.
- Unit Operating Temperature T OP - -20 105 ℃ Storage Temperature T ST - -40 150 ℃ DC Supply Voltage(V DD , FG) V DD - 6.5 V PWM HIGH - 6.5 V PWM Voltage Range PWM LOW - 0 V Supply Current I DD - 6 mA Continuous Current I CONT - 500 mA Hold.
- 12, 2009 P.4 FEELING TECHNOLOGY Recommended Operating Conditions Values Parameter Conditions min.
- Unit Supply Voltage (V DD ) - 1.8 5.5 V Ambient Temperature (T a) - -20 105 ℃ Electrical Characteristics VDD =5.0V, T a=25 ℃℃℃℃ (unless otherwise specified) Values Parameter Conditions min.
- Unit Average Supply Current(no load) 3 mA Output Saturation Voltage(FG) I out = 5mA 0.4 V Output Leakage Current(FG) V out =5V 1 µA On resistance(Rpmos+Rnmos) 0.8 Ω Thermal Shutdown Threshold 150 ℃ Locked Rotor Period(T ON ) 0.4 s Locked R.
- V DD -15 -10 0 1 2 3 4 5 6 V DD (volts) Magnetic field (G auss) Bop, Ta=25 Brp, Ta=25 Bhyst, Ta=25 Magnetic parameters vs.
- The IC laying aside mode declaration is as follows: Figure.13 Soldering (Pure Tin) Width (d3) PCB PCB PCB Width (d2) Rotor Height (d1) Vertical Height (d) Rotor Magnet IC INK View M otor C oil VC C G N D FG C 1 IC 1 FD 0259f/TS826 FG 1 VS.
Topics covered by the datasheet
The document includes sections related to:
- Features
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FD0259fR-G1 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fd0259fr-g1-feeling-technology-corp