FB12 overview
FB12 is a component documented by Stackpole Electronics,. The PDF description identifies it as "Multilayer Ferrite Chip Bead Inductor 04/28/2020." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Stackpole Electronics, ...
- Part number: FB12
- Category: IC
- Datasheet length: 17 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Resistive Product Solutions Electrical Specifications – General Purpose Electrical Specifications – General Purpose Mechanical Specifications (cont.) Part Impedance Test Frequency DCR Rated Current Number (Ω) (MHz) (Ω) max. (mA) max.
- Resistive Product Solutions Electrical Specifications – General Purpose Part Impedance Test Frequency DCR Rated Current Number (Ω) (MHz) (Ω) max. (mA) max.
- Resistive Product Solutions Electrical Specifications – General Purpose Electrical Specifications – General Purpose Electrical Specifications – General Purpose Part Impedance Test Frequency DCR Rated Current Number (Ω) (MHz) (Ω) max. (mA).
- FB12YTYN700 70 25% 100 0.3 500 FB12YTYN121 120 25% 100 0.2 500 Tolerance Part Impedance Test Frequency DCR Rated Current Number (Ω) (MHz) (Ω) max. (mA) max.
- Resistive Product Solutions Part Impedance Test Frequency DCR Rated Current Number (Ω) (MHz) (Ω) max. (mA) max.
- Resistive Product Solutions Mechanical Performance Tests Item Specification Test Condition / Test Method Test device shall be soldered on the substrate Substrate dimension: 100x40x1.6mm Deflection: 2 mm Keeping time: 30 seconds For 0402, s.
- Total of 6 hours Appearance: No damage Pre-heating: 150°C, 1 minute Solder temperature: 260±5°C Immersion time: 10±1 seconds Pre-heating: 150°C, 1 minute Solder temperature: 245±5°C Immersion time: 4±1 seconds 02 series: ≥0.2Kg 03 series.
Topics covered by the datasheet
The document includes sections related to:
- FB_SERIES SEI
- Description
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FB12 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fb12-stackpole-electronics