FB10 overview
FB10 is a component documented by Japan Aviation Electron. The PDF description identifies it as "0.3mm Pitch, 0.9mm Height FPC Connector." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Japan Aviation Electron...
- Part number: FB10
- Category: IC
- Datasheet length: 6 Pages
Key features noted in the PDF
- Space-saving FPC connector with 0.3mm pitch, 0.9mm overall height, 2.5mm depth.
- Applicable FPC thickness 0.2 0.03mm, ZIF structure, bottom-surface connection type.
- Guides for FPC sides prevent misalignment by holding the FPC in place until the actuator locks.
- Easy actuator operation.
- Open actuator is lightly locked in place so it does not to interfere with FPC insertion.
- Board pattern traces are possible under the connector (excluding terminal area).
- Pb-free, halogen-free compliant product.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- of Contacts: 11 to 61 positions Contact Resistance: 80m max Dielectric Withstanding Voltage: AC250 Vr.m.s per minute Operating Temperature: -40 Deg.
- C Durability: 20 mating cycles Space-saving FPC connector with 0.3mm pitch, 0.9mm overall height, 2.5mm depth.
- Applicable FPC thickness 0.2 0.03mm, ZIF structure, bottom-surface connection type.
- Compliant with rated current of DC 0.35A per contact. Rated Current: DC 0.35 A per contact Rated Voltage: AC, DC each 50V per contact Applicable FPC Thickness: 0.2 0.03mm Pitch: 0.3mm staggered alignment The FB10 Series is a 0.3mm pi.
Topics covered by the datasheet
The document includes sections related to:
- DATASHEET SEARCH SITE
- Features
- Ordering Information
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FB10 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fb10-japan-aviation-electron