FAN3111 overview
FAN3111 is a component documented by ON Semiconductor. The PDF description identifies it as "Single 1A High-Speed, Low-Side Gate Driver January 2015 Rev. 1.6." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: ON Semiconductor
- Part number: FAN3111
- Category: Logic IC
- Datasheet length: 19 Pages
Key features noted in the PDF
- Typical currents with OUT at 6V and V DD = 12V.
- Thresholds proportional to an externally supplied reference voltage .
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- 1.6 2 FAN3111 — Single 1A High-Speed, Low-Side Gate Driver Threshold Package Packing Method Quantity per Reel FAN3111CSX CMOS 5-Pin SOT23 Tape & Reel 3,000 FAN3111ESX External 5-Pin SOT23 Tape & Reel 3,000 Thermal Characteristics(1) Packag.
- Theta_JL ( JL): Thermal resistance between the semiconductor junction and the bott om surface of all the leads (including any thermal pad) that are typically soldered to a PCB.
- Theta_JT ( JT): Thermal resistance between the semiconductor junction and the top surface of the package, assuming it is held at a uniform temperature by a top-side heatsink.
- Theta_JA ( ΘJA): Thermal resistance between junction and ambient, dependent on th e PCB design, heat sinking, and airflow.
- Pin Definitions Pin # Name Description 1 VDD Supply Voltage.
- Reference for input thresholds, 2 V to 5 V.
- The device may not function or be operable above the recommended operating conditions and s tressing the parts to these levels is not recommended.
Topics covered by the datasheet
The document includes sections related to:
- Ordering Information
- Electrical Characteristics
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FAN3111 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fan3111-on-semiconductor