FABS21 overview
FABS21 is a component documented by HY ELECTRONIC CORP. The PDF description identifies it as "Surface Mount Glass Passivated Bridge Rectifiers." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: HY ELECTRONIC CORP.
- Part number: FABS21
- Category: IC
- Datasheet length: 3 Pages
Applications listed in the PDF
- General purpose use in AC/DC bridge full wave rectification, for SMPS, lighting ballaster, adapter, etc. Maximum Ratings and
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Single phase, half wave, 60Hz, resistive or inductive load.
- IFSM 45 A 1.35 500 350 IR 5.0 μA 8.4 Pb Package Outline Dimensions in Inches (Millimeters) FABS205 THRU FABS210 Surface Mount Glass Passivated Bridge Rectifiers Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes Rating and Ch.
- 2, 01-Jun-2020 0.01 0.1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig.
- 4 - Typical Forward Characteristics Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig.
- 2 - Maximum Non-Repetitive Surge Current Number of Cycles at 60Hz Peak Forward Surge Current (A) 1 10 100 8.3mS Single Half-Sine-Wave (JEDEC METOD) Instantaneous Reverse Current (uA) Fig.
Topics covered by the datasheet
The document includes sections related to:
- Applications
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the FABS21 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=fabs21-hy-electronic-corp